Cellwrite Studio operating manual · CWS-OM-001, revision A
Overview of this manual
About this manual
This manual describes how to use Cellwrite Studio 0.45.6. It covers opening and editing robot programs, checking them, playing them in 3D, working with the cell, connecting to robots, the PLC program and Cellwrite AI.
Document ID: CWS-OM-001. Revision: A.
Usage
Use this manual when you start using Cellwrite Studio and as a reference afterwards. Each chapter covers one part of the window. Procedures are written as numbered steps. Press F1 anywhere in the program to open the chapter for the part of the window you are in.
Who should read this manual
This manual is intended for:
- robot programmers and commissioning engineers;
- maintenance engineers who check or change robot programs;
- engineers who analyse cycle time, interference and faults in a cell.
Prerequisites
The reader should:
- know how the robots in the cell are operated from the FlexPendant;
- be familiar with the robot programming language used (RAPID for ABB robots, TP for FANUC robots);
- be trained in the safety procedures of the site.
References
| Reference | Document ID |
|---|---|
| ABB Technical reference manual - RAPID Instructions, Functions and Data types (RobotWare 7) | 3HAC065038-001 |
| ABB Technical reference manual - RAPID Instructions, Functions and Data types (RobotWare 6) | 3HAC050917-001 |
| ABB Technical reference manual - RAPID Overview (RobotWare 7) | 3HAC065040-001 |
| ABB Operating manual - RobotStudio | 3HAC032104-001 |
The ABB manuals are published by ABB in the ABB Library. They are not part of Cellwrite Studio. See Appendix A for how Cellwrite Studio opens them.
Revisions
| Revision | Description |
|---|---|
| A | First edition, released with Cellwrite Studio 0.45.6. |
How this manual is written
- Names of buttons, tabs and menus are written in bold: Check program.
- Keys are written as Ctrl+S.
- A path through the ribbon or a menu is written with arrows: Code > Find > Replace.
- Notes are marked as follows.
Note
Information that helps you use the program.
Tip
A quicker or better way to do something.
Caution
Something that can lose your work or give a wrong result.
Warning
Something that can lead to a robot moving in a way you did not intend.