Cellwrite Studio operating manual · CWS-OM-001, revision A
Keyboard reference
Everywhere
| Keys | Command |
|---|
| F1 | This manual, at the part of the window in front |
| Ctrl+1 to Ctrl+6 | Code, Points, Cell, Compare, Live, PLC |
| Ctrl+Shift+P | Every command, by name |
| Ctrl+K | Search for a routine, point or signal |
| Ctrl+I | Cellwrite AI |
| Ctrl+, | Settings |
| Ctrl+Alt+= / Ctrl+Alt+- / Ctrl+Alt+0 | Larger / smaller / default size |
| Ctrl+Q | Exit |
Files
| Keys | Command |
|---|
| Ctrl+O | Open backup |
| Ctrl+S | Save the module in front |
| Ctrl+Shift+S | Save every change in the backup |
| Ctrl+W | Close the tab |
Editor
| Keys | Command |
|---|
| Ctrl+Z / Ctrl+Y | Undo / redo |
| Ctrl+X / Ctrl+C / Ctrl+V | Cut / copy / paste |
| Ctrl+F | Find |
| Ctrl+H | Replace |
| F3 | Find next |
| Ctrl+Shift+F | Find in files |
| F12 | Go to definition |
| Shift+F12 or F4 | Find references |
| Alt+Left / Alt+Right | Back / forward |
| Ctrl+G | Go to line |
| Ctrl+Shift+O | Go to a routine or data in the module |
| Ctrl+P | Quick open |
| Ctrl+/ | Comment or uncomment |
| Shift+Alt+F | Format the module |
| Ctrl+F2 | Set or clear a bookmark |
| Ctrl+B / Ctrl+Shift+B | Next / previous bookmark |
| F8 | Check program |
| Ctrl+Shift+A | Find anything |
| Ctrl+Shift+K | Calibrate from measurements |
Running offline
| Keys | Command |
|---|
| F5 | Start |
| Shift+F5 | Stop |
| F10 | Step over |
| F11 | Step into |
| Shift+F11 | Step out |
| Ctrl+F10 | Run to cursor |
| F9 | Set or clear a breakpoint |
3D views and the cell
| Keys | Command |
|---|
| Drag | Turn the view |
| Ctrl+drag, middle button | Pan |
| Wheel | Zoom |
| Double-click | See everything |
| F11 | Full screen (Cell > Layout) |
| Esc | Leave full screen |
| Ctrl+M | Mark the moment in a recording |
Play programs (robot interference)
| Keys | Command |
|---|
| Space | Play or pause |
| Home | Both robots to the start |
| Left / Right | Both robots back or on 1 s |
| Shift+Left / Shift+Right | Both robots back or on 0.1 s |
| Page Up / Page Down | Previous or next clash |
PLC
The PLC editor takes Studio 5000 Logix Designer's keys. While it has the keyboard, Ctrl+F, Ctrl+H, Ctrl+G and F3 are the PLC editor's, not the code editor's.
| Keys | Command |
|---|
| Ctrl+R or Ins | Add a rung |
| Alt+Ins | Add Ladder Element |
| A letter | Add Ladder Element, as typed so far |
| Enter | Type the rung picked (or change the operand of the instruction picked) |
| F2 | Change the operand picked |
| Ctrl+D | Rung comment |
| Ctrl+Alt+D | Description of the operand picked |
| Del | Delete the instruction picked, or the rungs picked |
| Ctrl+X / Ctrl+C / Ctrl+V | Cut / copy / paste the instruction picked, or the rungs |
| Alt+Up / Alt+Down | Move the rungs picked |
| Up / Down | Rung to rung (Shift picks several) |
| Left / Right | Instruction to instruction |
| Ctrl+Home / Ctrl+End | First / last rung |
| Ctrl+A | Pick every rung |
| Ctrl+F | Search |
| F3 / Shift+F3 | Next / previous search result |
| Ctrl+E | Cross reference of the operand picked |
| Ctrl+G | Go to a rung or a routine |
| Ctrl+H | Replace |
| Ctrl+T | Toggle the bit picked, while simulating |
| F1 | What the instruction picked does (this manual when none is picked) |
| Ctrl+S | Save the L5X |
The manual
| Keys | Command |
|---|
| Alt+Left / Alt+Right | Back / forward |
| Ctrl+F | Search the manual |
| Ctrl+P | Print |